1. <ol id="yzt9d"><samp id="yzt9d"><blockquote id="yzt9d"></blockquote></samp></ol>
  2. <span id="yzt9d"><pre id="yzt9d"></pre></span>

  3. 產品資料

    奧林巴斯5072PR脈沖發生器

    如果您對該產品感興趣的話,可以
    產品名稱: 奧林巴斯5072PR脈沖發生器
    產品型號: 5072PR
    產品展商: 美國奧林巴斯
    會員價格: 0.00 元
    產品文檔: 無相關文檔

    簡單介紹

    5072PR,5073PR,5077PR 5072PR,5073PR,5077PR 5072PR,5073PR,5077PR 深圳華清儀器特價代理5072PR,5073PR,5077PR脈沖發生器 深圳華清儀器特價代理5072PR,5073PR,5077PR脈沖發生器 深圳華清儀器特價代理5072PR,5073PR,5077PR脈沖發生器 奧林巴斯5072PR脈沖發生器 奧林巴斯5072PR脈沖發生器


    奧林巴斯5072PR脈沖發生器  的詳細介紹

    產品型號 

    PULSER 5072PR 5073PR 5077PR
    Pulse Type 
    (main bang):
    Negative Negative Impulse Negative Square Wave
    Rise Time 
    (10% to 90%):
    Typically 5 ns, 10 ns max Typically <2 ns

    Typically <10 ns, 20 ns max 
    (rise and fall time)

    Available Pulse Voltage: 
    (no load) 

    -360 V -180 V Select -400 V, -300 V, -200 V, -100 V
    Available Pulse Energy: 13, 26, 52, or 104 μjoules 2, 4, 8, or 16 μjoules N/A
    Damping: Select 15, 17, 20, 25, 36, 50, 
    100, or 500 ohms
    12, 14, 17, 20, 25, 33, 50, or 
    100 ohms
    N/A
    Pulse Width: N/A N/A 10 preset fixed widths: 15-20,10, 7.5, 5.0-6.0, 3.5-4.0, 2-2.25, 1.0, 0.5, 0.25, 0.1 MHz. 
    Variable +/-25% fine vernier tuning for each width.
    Mode: Pulse Echo or Thru-Transmission
    Isolation (53 dB min): Typically 62 dB at 10 MHz Typically 62 dB at 50 MHz Typically 62 dB at 10 MHz
    Pulse Repetition Rate: 
    (Internal)
    100, 200, 500, 1000, 2000, or 5000 Hz 200, 500, 1000, 2000, 5000, 10000, or 20000 Hz

    100, 200, 500, 1000, 2000, 5000 Hz, except that maximum PRF is limited to: 2000 Hz FOR 0.5 MHz tranducers, 1000 MHz for 0.25 MHz transducers, and 50 Hz for 0.1 MHz transducers.

    Pulse Repetition Rate: 0-6 kHz 
    (External)
    0-10 kHz 0-5 kHz (observe limitations of PRF versus pulse width)
    Synch Output Pulse: 3 V into 50 ohms
    External Trigger Input: 
    (in series with 10 Kohms)
    2.4 V into 1000 PF 
    200 ns minimum pulse width
    2.4 V into 1000 PF 
    200 ns minimum pulse width
    2.4 V into 1000 PF 
    50 ns minimum pulse width
    RECEIVER 5072PR 5073PR 5077PR
    Maximum Bandwidth: 
    (-3 dB, RL=50 ohms)
    1 kHz - 35 MHz 1 kHz - 75 MHz 1 kHz - 35 MHz
    Voltage Gain: 0-59, 1 dB steps (RL=50 ohms) 0-39, 1 dB steps (RL=50 ohms) 0-59, 1 dB steps (RL=50 ohms)
    Phase: inverting or non-inverting (internal switch)
    Attenuator Range: 0-59, 1 dB steps (RL=50 ohms) 0-49, 1 dB steps (RL=50 ohms)

    0-49, 1 dB steps (RL=50 ohms)

    High Pass Filter: 1 kHz (out) or 1 MHz 1 kHz (out) or 5 MHz 1 kHz (out) or 1 MHz
    Low Pass Filter: 35 MHz (out) or 10 MHz 75 MHz (out) or 20 MHz 35 MHz (out) or 10 MHz
    Noise: 70 μV pk-pk typical, referred to input, BW=35 MHz 200 μV pk-pk typical, referred to input, BW=75 MHz 70 μV pk-pk typical, referred to input, BW=35 MHz
    Max Signal Output: +/-1V pk., terminated in 50 ohms
    Input Resistance: 
    (Thru-Transmission)
    500 ohms linear range 
    100 ohms > linear range
    100 ohms linear range 
    50 ohms at levels > linear range
    500 ohms
    Output Impedance: 50 ohms 50 ohms 50 ohms
    Maximum Input Power: 400 mW 400 mW 500 mW
    UNIT 5072PR,5073PR,5077PR
    Input/Output: External Trigger In, Sync Out, RF Out, T/R and R: All BNC female connectors
    Power Main Requirements:

    100/120/220/240 VAC, 50/60 Hz

    Operating Temperature: 0-50°C
    Size and Weight: 7" W x 3.5" H x 9.1" D (178 mm x 89 mm x 232 mm); 5 lbs (2.3 kg)

    ORDERING INFORMATION: Each model is shipped with a power cord and operator manual. Transducers and cables are sold separately. 
    Our sales department is available to discuss your application in detail and to assist with transducer selection.

    *All specifications are subject to change without notice.

    產品留言
    標題
    聯系人
    聯系電話
    內容
    驗證碼
    點擊換一張
    注:1.可以使用快捷鍵Alt+S或Ctrl+Enter發送信息!
    2.如有必要,請您留下您的詳細聯系方式!
    人妻少妇乳峰乱颤娇喘连连
    1. <ol id="yzt9d"><samp id="yzt9d"><blockquote id="yzt9d"></blockquote></samp></ol>
    2. <span id="yzt9d"><pre id="yzt9d"></pre></span>